BLAST OEM PARTS LIST
We offer a huge list of premium Blast OEM parts manufactured to strict OEM specifications
BLAST PARTS
We offer a huge list of premium Blast OEM parts manufactured to strict OEM specifications
We are the premier manufacturer of quality replacement parts for use in all OEM shot blast applications.
Astech components and wear parts are engineered and manufactured to stringent quality standards and are guaranteed to adapt perfectly for use in all OEM blast machines.
Wheelabrator – Parts list
| P/N | DESCRIPTION |
|---|---|
| 000001 | SEAL & FASTENER KIT (M & RLM LINERS) |
| 000007 | 3/4″ SQ X 18 HUB SEAL-M & RLM WHL |
| 000008 | 3/4″ SQ X 22 HUB SEAL – R WHL |
| 104111 | BLADES, 8/SET |
| 105509 | RUBBER CONVEYOR BELT, Drain Hole 0.38″ dia, 20 x 27 |
| 106510 | Elevator Bolt Assemblies |
| 108664 | OIL SIGHT GAGES |
| 109651 | RUBBER CONVEYOR BELT, Drain Hole 0.38″ dia, 27 x 36 |
| 110437 | Retainer Clip, each |
| 112958 | Retainer Clip, each |
| 118636 | KEY |
| 12x12Linerspec | Liner, 12 x 12 with insert (also 728821) |
| 121607 | BARREL HEAD HUB 27 x 36 |
| 130073 | LOWER END LINER – 27 X 36 |
| 130856 | SPROCKET |
| 133655 | Sheave Ass’y., 2 Groove w/ Bushing & Key |
| 134805 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 134961 | SPROCKET |
| 135280 | HANGING HOOK LINER 14 X 22 X 1 |
| 137633 | RUBBER CONVEYOR BELT, Drain Hole 0.31″ dia, 27 x 36 |
| 138981 | HANGING HOOK LINER – 14 X 14 X 1 |
| 142615 | RUBBER CONVEYOR BELT, Drain Hole 0.38″ dia, 15 x 20 |
| 142793 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 143669 | CAGE RETAINER |
| 144655 | CASTBARREL HEAD LINER 27 x 36 |
| 144669 | IMPELLER – Q WHEEL |
| 145586 | HANGING HOOK LINER 14 X 26 1/2 X 1 |
| 145587 | HANGING HOOK LINER 14 X 28 X 1 |
| 145588 | HANGING HOOK LINER 14 X 18 X 1 |
| 145589 | HANGING HOOK LINER 14 X 25 X 1 |
| 145792 | FEED SPOUT – M WHL – 90 DEG |
| 146110 | Barrel Head Screw, Flat Head Cap |
| 148084 | HANGING HOOK LINER 14 X 14 X 3/8 |
| 148610 | CABINET LINER, 2 x 12 Shiplap |
| 148963 | BLADE G WHEEL 8/set |
| 150078 | RUBBER CONVEYOR BELT, Drain Hole 0.19″ dia, 27 x 36 |
| 150574 | CORNER LINER 4 X 6 X 23 1/2 |
| 150574 NH | CORNER LINER 4 X 6 X 23 1/2 (NO HOLE) |
| 150576 | HANGING HOOK LINER 10 X 14 X 3/8 |
| 151426 | Mill Drive Shaft 28 super I |
| 151434 | LINK – LH 22, 28 & 34 SUPER I (use 294215) |
| 151435 | LINK – RH 22, 28 & 34 SUPER I (use 294216) |
| 151440 | Barrel Bearing Housing |
| 151966 | Bearing Cap Seal |
| 151970 | SEAL, BEARING, RUBBER |
| 151971 | Felt Seal |
| 152123 | SPROCKET |
| 152341 | Barrel Head Bearing Cap |
| 152346 | Liner, Barrelhead, Center 36×42, 48×42, 48×48, 48×72, 7/14/22/28/34 Super 1 |
| 153169 | LINK PIN (USE 294246) |
| 153175 | “M” CONTROL CAGE ADAPTER |
| 153177 | WHEEL HSG ASSEMBLY – M |
| 153191 | Hub Seal Assy (includes 458620, 458621, 000007) **we sell these parts Individually** |
| 153260 | BLADES – M WHL – 19 1/2″ (SPRING LOCK) |
| 153854 | REPLACEMENT SHAFT – “M”-28 1/8″ L |
| 153877 | IMPELLER (use 408000 IMPELLER) |
| 153878 | CENTERING PLATE – M WHL |
| 153892 | CONTROL CAGE – M WHEEL – 100 DEG-VEE-CW |
| 153918 | CLAMPING LUG – M WHL |
| 153939 | WHEEL BEARING ASSEMBLY – “M” – OIL OR GREASE |
| 153943 | SPRING LOCK – M & Q WHL sold by the each |
| 153946 | HUB ASSEMBLY – “M” & “RLM” W/TAPER LOCK |
| 153958 | Taper Lock Bushing 2525 2.500″ (USE 2525212) |
| 154439 | Spacer Collar |
| 154440 | Spacer Collar |
| 154864 | CAP NUT 5/8-11 1-1/8” hex x 1-1/2” Long |
| 155078 | Rubber Conveyor Belt, Drain Hole 0.19″ dia, 27×36 |
| 155909 | BARREL HEAD BEARING CAP |
| 157005 | RUBBER CONVEYOR BELT, Drain Hole 0.31″ dia, 20 x 27 |
| 158009 | LINK – RH 7 & 14 SUPER I (also 681318) |
| 158010 | LINK – LH 7 & 14 SUPER I (also 681319) |
| 158032 | Bucket, Elevator |
| 158063 | IMPELLER BOLT M, RLM & BD WHEEL |
| 158082 | WHEEL HOUSING COVER SEAL 22 x 6.5 – M & RLM |
| 159161 | RUBBER CONVEYOR BELT, Drain Hole 0.44″ dia, 27 x 36 |
| 159320 | CONTROL CAGE – M WHEEL – 100 DEG-VEE-CCW |
| 159395 | LINER |
| 159638 | LINK PIN – 7 & 14 SUPER I |
| 159710 | Spherical Roller Bearing |
| 159813A | Barrel Head, Outer Segments, 14 Super I |
| 159887 | Felt Seal |
| 159888 | Rubber Seal |
| 160009 | CENTER PLATE R WHL |
| 160019 | CONTROL CAGE ADAPTER R WHL |
| 160037 | SEAL, FELT |
| 160039 | BLADES – R WHL – 21″ (SPRING LOCK) |
| 160247 | WHEEL BEARING ASSEMBLY – “R” – OIL OR GREASE |
| 160248 | HUB ASSEMBLY – “R” WHL WITH TAPER LOCK |
| 160314 | CONTROL CAGE – M WHEEL – 82 DEG-VEE-CW |
| 160412 | BLADES – Q WHL – 15″ (SPRING LOCK) |
| 160556 | Retainer Ring, each |
| 161877 | KEY – SHEAVE END |
| 161878 | LOCK CAP FOR SHEAVE |
| 161879 | BEARING SPACER GREASE |
| 161880 | BEARING SEAL SPACER |
| 161881 | INNER SEAL |
| 161882 | END CAP |
| 161883 | BEARING HOUSE |
| 161884 | PILLOW BLOCKS |
| 161887 | REPLACEMENT SHAFT – “R” 26 13/16″ L |
| 164527 | REPLACEMENT SHAFT – “M” – 28 7/8″ L |
| 164604 | BEARING END CAP – M WHEEL |
| 164677 | HUB ASSEMBLY-“M”&”RLM” WITH T.L.-SPECIAL LNGTH |
| 164774 | SEAL, FELT |
| 164881 | WHL BRNG ASSY -“M”-OIL OR GREASE – EXTRA LONG |
| 165620 | Stud / Full, |
| 165790 | IMPELLER LOCKWASHER – M & RLM WHL |
| 165895 | SPRING LOCK – R WHEEL |
| 16600 | Bushing |
| 16653 | Elevator Boot Pulley |
| 167279 | LOCK CLAW |
| 16849 | Bucket, Elevator |
| 169565 | BARREL HEAD SHAFT 22 SUPER |
| 169614 | BARREL HEAD HUB 22 SUPER |
| 169654 | BARREL HEAD UNIT BEARING ASSEMBLY |
| 171159 | BARREL HEAD SHAFT |
| 171410 | RUBBER CONVEYOR BELT, Drain Hole 0.19″ dia, 20 x 27 |
| 171427 | Oil Seal |
| 17202 | Bucket, Elevator |
| 173314 | Felt Seal |
| 173435 | BARREL HEAD BOLTS |
| 173945 | RUBBER CONVEYOR BELT, Drain Hole 0.63″ dia, 27 x 36 |
| 173967 | SEAL RING R WHEEL |
| 173987 | DRIBBLE VALVE ASSEMBLY, B-292 |
| 17401 | Elev Bolt, Washers, and Nuts for bucket assembly |
| 175174 | BARREL HEAD ASSEMBLY |
| 176068 | barrel head bolt flat head cap screw .5-13 X 2 HDN STL |
| 178990 | SPROCKET 24 1/8 DIA |
| 179062 | LINK PIN 70 SUPER |
| 179748 | Deflector Liner |
| 181629 | Lock Washer |
| 193525 | SPROCKET, Conveyor Drive – 7 & 14 SUPER |
| 193526 | TRACTION WHEEL – 7 & 14 SUPER, 14 SUPER II |
| 196680 | CONTROL CAGE – M WHEEL – 49 DEG-SQ-CW&CCW |
| 196680MOD | CONTROL CAGE – M WHEEL – 49 DEG-SQ-CW&CCW |
| 197317 | WEAR RESISTANT WASHER 2″ OD x 11/16 ID x 1/4″ |
| 197615 | SPROCKET, Conveyor – 22, 28 & 34 SUPER |
| 197616 | TRACTION WHEEL – 22, 28, & 34 SUPER I & II |
| 198457 | 198457 HARDENED NUT 1/2″-13 79950 |
| 198600 | IMPELLER LOCKWASHER – 1/2″ – Q WHL |
| 199179 | Elevator Head Pulley Shaft |
| 2 X 12 | CABINET LINER |
| 203208 | “R” WHL ASSEMBLY CW – 21″ X 5″ |
| 203244 | “R” WHL ASSEMBLY CCW – 21″ X 5″ |
| 20357 | HARDENED CAP NUT (USE 79950) |
| 204592 | Door Seal 6″ |
| 204593 | DOOR SEAL, 9″ |
| 204594 | Door Seal, 12″ |
| 208200 | WHEEL BEARING ASSEMBLY – “M” – OIL OR GREASE |
| 208846 | ROLL PIN 14 SUPER II – 1/4 X 2 (S590046-16 ROLL PIN) |
| 209592 | HANGING HOOK LINER 14 X 22 X 1/2 |
| 211910 | PILLOW BLOCK ASSEMBLY – M-WHEEL (also 94832) |
| 211911 | BEARING HOUSING – M WHEEL – SHORT (incl. 211914 Ret.) |
| 211912 | REPLACEMENT SHAFT – “M” – 19″L |
| 211913 | BEARING SPACER SHORT |
| 211914 | GREASE SEAL RETAINER |
| 211916 | O Ring .250” x 5.5” |
| 213887 | LINER, 3 x 12 Shiplap on 3 sides |
| 213888 | LINER, 3 X 12 Shiplap on 4 sides |
| 215581 | CABINET LINER, 2 x 12 Shiplap |
| 217011 | RUBBER CONVEYOR BELT, Drain Hole 0.50″ dia, 15 x 20 |
| 219340 | Tetra Seal |
| 220040 | 1/2″-13 CAST NUT – FLANGED |
| 220041 | 3/8″-16 SQUARE CAST NUT |
| 220042 | 1/2″ SQUARE CAST NUT |
| 220043 | 1/2″ CAST NUT – HEX |
| 222063 | RUBBER CONVEYOR BELT, Drain Hole 0.50″ dia, 20 x 27 |
| 223306 | CABINET LINER, 12 X 12, WITH HOLE |
| 223306-M | CABINET LINER, 12.5 X 12.5, WITH HOLE |
| 225000 | 5/8″ CAST NUT – HEX |
| 225602 | 20X6 CR Steel Split Pulley |
| 225682 | Split Boot Pulley |
| 226000 | CAST NUT – 1″ Hex Acorn |
| 230223 | Taper Lock Bushing |
| 233793 | “M” WHL ASSEMBLY CW – 19 1/2″ X 2 1/2″ |
| 233794 | “M” WHL ASSEMBLY CCW – 19 1/2″ X 2 1/2″ |
| 233875 | “M” WHL ASSEMBLY CW – 19 1/2″ X 1 5/8″ |
| 233876 | “M” WHL ASSEMBLY CCW – 19 1/2″ X 1 5/8″ |
| 234096/7 | CABINET LINER 6 3/8 X 12 |
| 234345 | HANGING HOOK LINER 14 X 22 X 1/2 (SPEC. CUT) |
| 234346 | HANGING HOOK LINER 14 X 22 X 1/2 (SPEC. CUT) |
| 235907 | CONT. CAGE ADAPTER SUPPORT – M WHL |
| 235911 | WHEEL HSG ASSEMBLY – M & RLM |
| 237595 | SHEAVE |
| 238774 | HANGING HOOK LINER 18 X 22 X 1/2 |
| 238775 | HANGING HOOK LINER 18 X 18 X 1/2 |
| 238776 | HANGING HOOK LINER – 18 X 14 X 1/2 |
| 241143 | Elevator Belt Bucket Assembly 14 Super I |
| 247019 | Sprocket, Roller Chain – Idler McMaster Carr |
| 24817 | Impeller Use 144669 |
| 249715 | CABINET LINER 12 x 12 WITHOUT HOLE |
| 250135 | IMPELLER BOLT R WHEEL (3/4 – 10 X 3″) |
| 254667 | CHAIN/ROLLER |
| 254669 | Chain, Roller |
| 254673 | CHAIN/ROLLER |
| 257280/1 | CABINET LINER 4 x 12 |
| 263177 | “M” WHL ASSEMBLY CW – 15″ X 2 1/2″ |
| 263178 | “M” WHL ASSEMBLY CCW – 15″ X 2 1/2″ |
| 263179 | “Q” WHL ASSEMBLY CW – 15″ x 2 1/2″ |
| 263203 | “Q” WHL ASSEMBLY CW – 15″ x 2 1/2″ |
| 263204 | “Q” WHL ASSEMBLY CW – 19 1/2″ x 2 1/2″ |
| 263205 | “Q” WHL ASSEMBLY CCW 19 1/2″ x 2 1/2″ |
| 268163 | Elevator Belt Ass’y- Complete w/ buckets, splice and hardware |
| 275914 | HUB SEAL RETAINER – L.H. (USE 458620) |
| 275915 | HUB SEAL RETAINER – R.H. (USE 458621) |
| 276148 | SLOT LINER |
| 281842 | WHEEL HSG COVER – M & RLM |
| 291252 | PLOW BOLT #3 Head, 3/4 x 3 1/4 – GRADE 8 (also 680991, M-1702) |
| 291252MN | PLOW BOLT 3/4 x 3 1/4″ MN 22,28 &34 CU FT |
| 293388 | LH Link, 50 cu. Ft., 76 cu. Ft. |
| 293389 | RH Link, 50 cu. Ft., 76 cu. Ft. |
| 294215 | LINK – L.H. 22,28 & 34 SUPER I (ALSO 151434 or 681325) |
| 294216 | LINK – RH 22, 28 & 34 SUPER I (ALSO 151435 or 681324 |
| 294246 | LINK PIN 22, 28 & 34 SUPER I |
| 298685 | LOWER SIDE LINER – M WHL |
| 298686 | LOWER SIDE LINER – M WHL |
| 298687 | UPPER SIDE LINER – M WHL |
| 298688 | CURVED TOP LINER – M & RLM WHL |
| 298689 | END LINER – 20 1/4 – M & RLM WHL |
| 298919 | LINK PIN, 50 cu. Ft., 76 cu. Ft. W/A |
| 3/8 x 2-3/4″ | Cotter Pins, 50 cu. Ft., 76 cu. Ft. |
| 30877 | 15×4 Liner Viking |
| 30880 | curved liner Viking |
| 34555 | ROLLER |
| 36307 | CENTERING PLATE – G & Q WHL |
| 36444 | Link Pins |
| 37454 | BUSHING |
| 37516 | ELEVATOR HEAD PULLER 27 X 36 |
| 38527 | Sprocket |
| 38879 | PIN |
| 4 X 12 | CABINET LINER also 257280/1 |
| 404268 | SPROCKET |
| 404644 | END LINER SET SCREW M & RLM |
| 404645 | WHEEL HOUSING BUSHING – M & RLM |
| 404646 | END LINER SET SCREW JAM NUT – M & RLM |
| 407151 | END LINER – 21 M &RLM WHL |
| 408000 | IMPELLER – M WHEEL ( ALSO 153877) |
| 40810 | CAP NUT |
| 408115A | LINER/UPPER SIDE / 50R & 50BDR |
| 408116A | LINER/LOWER SIDE / 50R & 50BDR |
| 408117A | LINER/LOWER SIDE / 50R & 50BDR |
| 408119A | End Liner 50R210 50BD150 50BD210 |
| 408545 | Head Pulley Shaft |
| 414370 | IMPELLER – RLM WHEEL |
| 414371 | CONTROL CAGE – RLM WHEEL – 70 DEG-SQ-CW&CCW |
| 414396 | FEED SPOUT – RLM WHL – 90 DEG (20349) |
| 414665 | “RLM” WHL ASSEMBLY CCW – 15″ X 2 1/2″ |
| 414667 | “RLM” WHL ASSEMBLY CW – 15″ X 2 1/2″ |
| 414699 | CLAMPING LUG – RLM WHL |
| 417089 | CENTERING PLATE – RLM WHL (20350) |
| 41868 | HUB ASSEMBLY – “Q” STRAIGHT BORE |
| 418966 | LINK – RH – 14 SUPER II |
| 418967 | LINK – LH – 14 SUPER II |
| 420006 | LINK PIN – 14 SUPER II |
| 420142 | Barrelhead Outer |
| 420143 | Barrelhead Center |
| 420166 | SPROCKET, Drive – 14 SUPER II |
| 422712 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 423249 | FEED SPOUT – RLM WHL – STRAIGHT |
| 423430 | WHEEL HOUSING ASSEMBLY – RLM |
| 423611 | CONTROL CAGE -RLM WHEEL – 82 DEG-VEE-CCW |
| 423661 | CONTROL CAGE – RLM WHEEL – 82 DEG-VEE-CW |
| 424124 | SPROCKET, Conveyor – 22, 28 & 34 SUPER II |
| 424460 | Barrel Head Seal, Top Rear, RH |
| 424461 | Barrel Head Seal, Front Top, RH |
| 424462 | Front Narrow Barrel Head Seal RH |
| 424463 | CORNER SHIELD, RIGHT HAND |
| 424464 | Barrel Head Seal, Top Rear, LH new pn 484288 |
| 424465 | Barrel Head Seal, Front Top, LH |
| 424466 | Front Narrow Barrel Head Seal LH |
| 424467 | CORNER SHILED, LEFT HAND |
| 424562 | LINK RH 22, 28 & 34 SUPER II (also 681322) |
| 424563 | LINK LH 22, 28 & 34 SUPER II (also 681323) |
| 424968 | Barrel Head Seal, RLH |
| 424969 | Barrel Head Seal |
| 425282 | ROLL PIN 1/4 X 2 1/2 ( 22, 28, 34 SUPER II) |
| 425414 | LINK PIN 22, 28 & 34 SUPER II |
| 426856 | TOP LINER SEAL STRIP (2 PCS) M & RLM WHL RUBBER STRIP, 1/8 X 5/8 X 27″ |
| 427073 | TUNE UP KIT – 25M195 WHL, 70 deg CC |
| 428571 | BLADES – RLM WHL 15″ (8 per set) |
| 428843 | Taper Lock Bushing |
| 441001 | END LINER-21 3/4 -M & RLM WHL |
| 441985 | CONTROL CAGE – RLM WHEEL – 49 DEG SQ-CW&CCW |
| 442157 | TUNE UP KIT 25Q 195 WHL |
| 442470 | LOWER SIDE LINER – RLM WHL |
| 442471 | LOWER SIDE LINER – RLM WHL |
| 442472 | UPPER SIDE LINER – RLM WHL |
| 443372 | TUNE UP KIT – 25M195 WHL, 82 deg CC |
| 443373 | TUNE UP KIT – 25Q150 WHL |
| 443514 | TUNE UP KIT – 25RLM150 WHL |
| 443535 | Liner, Barrelhead, Outer |
| 443536 | Liner, Barrelhead, Outer |
| 444082 | TUNE UP KIT – 25RLM195 WHL |
| 444471 | CONTROL CAGE – RLM WHEEL – 100 DEG-VEE-CCW |
| 444472 | CONTROL CAGE – RLM WHEEL – 100 DEG-VEE-CW |
| 444903 | BLADES – RLM WHL – 19 1/2″ |
| 448251 | SEAL RING – RLM WHL |
| 449506 | TUNE UP KIT – 25RLM195 WHL |
| 449507 | TUNE UP KIT – 25RLM195 WHL |
| 449596 | TUNE UP KIT – 25RLM195 WHL |
| 449612 | G” bare WHEEL – CW – 12″ X 2 1/2″ |
| 449641 | Conveyor Flight Mang Steel 3/8″ drain holes w/o TB, 14 cu ft sup II |
| 449643 | Conveyor Flight Manganese Steel 3/8 drain holes (28 Super II) |
| 450852 | END LINER-22 1/2 -M & RLM WHL |
| 45101 | HUB G WHEEL |
| 451252 | Bolts, Solid Mg Flight Only, 1″ x 5-1/2″LG SLL |
| 451579 | CONTROL CAGE ADAPTER – RLM WHEEL (ALSO 471857) |
| 452160 | CLAMPING LUG – RLM WHL – (DEEP) |
| 452484 | TUNE UP KIT – 25RLM195 WHL |
| 453658 | TUNE UP KIT – 25RLM150 WHL |
| 454807 | TUNE UP KIT – 50R210 70 deg |
| 45512 | ROLLER |
| 45513 | BUSHING |
| 45558 | SEAL RING – M WHL WE23 |
| 456660 | Conveyor Flight Manganese Steel w/o TB 14 cu ft TB |
| 456670 | PLOW BOLT – 5/8″ x 2-3/4″ Mang N – 7 &14 CU FT |
| 458620 | HUB SEAL RETAINER – M & RLM WHL L.H. |
| 458621 | HUB SEAL RETAINER – M & RLM WHL R.H. |
| 459353 | RUBBER CONVEYOR BELT, Drain Hole 0.63″ dia, 20″ x 27″ |
| 459509 | TUNE UP KIT – 25RLM150 WHL |
| 459736 | Conveyor Flight Manganese Steel w/o TB 7 cu ft TB |
| 461043 | TUNE UP KIT – 25M195 WHL, 49 deg CC |
| 461481 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 461510 | TUNE UP KIT – 25RLM195 WHL |
| 466139 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 467312 | LINER, END – 25RLM150 |
| 467313 | LINER, CURVED TOP – 25RLM150 |
| 469673 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 470873 | PLOW BOLT – 1/2-13 x 2-1/2″ MN – 27 x 36 |
| 47104 | Elevator Head Pulley 20×27 |
| 471181 | FEED SPOUT, CURVED, W/A 25BD250 / EZ Wheel 90 DEG |
| 471184 | BLADES – BD WHEEL – 19 1/2″ |
| 471187 | CLAMPING LUG – BD WHEEL |
| 471197 | END LINER – 19 1/2″ BD WHEEL |
| 471198 | CURVED TOP LINER – 19 1/2″ BD WHEEL |
| 471199 | CONTROL CAGE ADAPTOR, W/A 25BD250 Wheel |
| 471200 | LINER, CONTROL CAGE ADAPTOR, W/A 25BD250 Wheel |
| 471539 | Elevator Belt Bucket Assembly, |
| 471857 | BD CONT. CAGE RETROFIT KIT TO RLM (ALSO 451579) |
| 47454 | RUBBER CONVEYOR BELT, Drain Hole 0.25″ dia, 15 x 20 |
| 474540 | RUBBER CONVEYOR BELT, Drain Hole 0.25″ dia, 15 x 20 |
| 474671 | TOP LINER (442472 W/ HOLES) |
| 476783 | CONVEYOR HOOK |
| 484355 | LINER, END – M / RLM, 24″ Long |
| 487697 | Taper Lock Bushing #2525 1.3750B |
| 48770 | CENTER PLATE Q WHL |
| 488166 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 488470 | COMPLETE LINER SET – M WHL |
| 488470 SPEC | COMPLETE LINER SET W/ 407151 REPLACEMENT LINER |
| 488471 | COMPLETE LINER SET – RLM WHL |
| 488471 SPEC | COMPLETE LINER SET W /407151 REPLACEMENT LINER |
| 490716 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 491944 | Tune Up Kit 25G120 70 Deg cc |
| 494309 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 494716 | RUBBER CONVEYOR BELT, Drain Hole 0.31″ dia, TBR 6 |
| 494717 | RUBBER CONVEYOR BELT, Drain Hole 0.38″ dia, TBR 6 |
| 494832 | RUBBER CONVEYOR BELT, Drain Hole 0.31″ dia, TBR 12 |
| 495224 | Roller Sleeve Wheelabrator |
| 495594 | RUBBER CONVEYOR BELT, Drain Hole 0.25″ dia, TBR 6 |
| 495595 | RUBBER CONVEYOR BELT, Drain Hole 0.25″ dia, TBR 6 |
| 495757 | RUBBER CONVEYOR BELT, Drain Hole 0.19″ dia, TBR 6 |
| 496346 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 496870 | RUBBER CONVEYOR BELT, Drain Hole 0.16″ dia, TBR 6 |
| 497123 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 497652 | HUB ASSEMBLY – BD WHL (HI SPEED) |
| 498368 | PLOW BOLT – 5/8″ X 2 1/2 – GRADE 8 (also 38286) |
| 498594 | TUNE UP KIT – 25 BD195 WHEEL |
| 498679 | RUBBER CONVEYOR BELT, Drain Hole 0.38″ dia, TBR 12 |
| 499622 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 499738 | TUNE UP KIT – 25RLM150 WHL |
| 499739 | TUNE UP KIT – 25RLM150 WHL |
| 499740 | TUNE UP KIT – 25RLM150 WHL |
| 499789 | LINK – RH (NEW STYLE-one piece cast link) 27 X 36 |
| 499790 | LINK – LH (NEW STYLE-one piece cast link) 27 X 36 |
| 4×12 spec | CABINET LINER 4×12 with Insert |
| 500062 | Nut, 1/2 Hex |
| 500063 | Nuts, 5/8″ |
| 500064 | Nut, 3/4 Hex |
| 500071 | Nut, Hardened (use 79950) |
| 500106 | Washer, Flat 1/2″ |
| 500108 | Lock Washers, 3/4″ |
| 500115 | Lock Washer, 3/8″ |
| 500116 | Lock Washer, 1/2″ |
| 500117 | Lock Washers, 5/8″ (also R5434150000) |
| 500118 | Lock Washers, 3/4″ |
| 500220 | Bolt, Hex head, 1/2″-13 x 1-1/4″ long |
| 500221 | Cap Screw |
| 500223 | Cap Screw, Hex Head, 1/2- 13 x 1 1/4″ |
| 500247 | Cap Screws, 5/8 x 1-3/4″ NC 1020 Hex Head |
| 500251 | Screw, Hex Head Cap |
| 500270 | Cap Screws, 3/4″ x 2-1/4″ Hex Head |
| 500272 | Screw, Hex Head Cap |
| 500273 | RUBBER CONVEYOR BELT, Drain Hole 0.25″ or 0.3125″ |
| 500311 | Cap Screws, 1″ x 4″ LG Bolts Hex Head |
| 500470 | Socket Head Cap Screw |
| 500473 | IMPELLER BOLT Q WHEEL 1/2-13 x 1 3/4″ Long |
| 500474 | Impeller Bolt – 1/2-13 x 2″ Long |
| 500601 | COTTER PIN 3/16 x 1″ |
| 500604 | COTTER PIN 1/4 X 2 ” 22, 28 & 34 SUPER |
| 500630 | Nuts, 5/8″ USE 500063 |
| 500632 | Bolt, Hex head, 1/2″-13 x 4″ long |
| 500670 | Socket Set Screw |
| 500850 | COTTER PIN 1/4 X 1 1/2″ 7 & 14 SUPER |
| 501168 | Screw, Hex Head Cap |
| 501849 | Screw, Hex Head, 1/2″=13 x 7/8″ |
| 502125 | Screw, Hex Head Cap |
| 51553 | Oil Seals |
| 51796 | SPROCKET 13T ASA#80, 1.500″ BORE, 3/8 X 3/16 KEYWAy |
| 52712 | RUBBER CONVEYOR BELT, Drain Hole 0.19″ dia, 15 x 20 |
| 563341-8 | Nut, Square 1/2-13 ( use 220042) |
| 57612 | FILTER CARTAGES C57612 12.75 x 36 x 8.375 |
| 6 X 12 | CABINET LINER |
| 6 x 12 no hole | cabinet liner w/no hole |
| 62025 | Head Pulley Super Series WA |
| 63522 | Elevator Head Pulley 27×36 |
| 63559 | Ball Bearing |
| 63599 | Ball Bearing w/ Inner Race |
| 64425 | Sprocket |
| 661995 | Elevator Bucket Assembly, 34 cu ft Super II |
| 665597 | TUNE UP KIT |
| 665782 | TUNE UP KIT |
| 670119 | HUB M WHEEL REVERSE TAPER |
| 670815 | Liner, Wear Plate |
| 671158 | RUBBER CONVEYOR BELT, Drain Hole 0.31″ dia, TBR 6 |
| 672075 | BLADES – BD WHEEL – 25″ |
| 672545 | FELT SEAL 4-1/4W X 7-3/4LG X 5/8″THK W/3″ DIA CIRCLE Cut Out |
| 673369 | TUNE UP KIT |
| 673389 | TUNE UP KIT – 25 BD195 WHEEL |
| 673393 | BARE WHEEL ASSEMBLY – BD WHEEL |
| 673880 | 8X6 Steel Split Pulley |
| 674037 | HUB SEAL RETAINER RH, W/A 25BD250 Wheel |
| 674038 | HUB SEAL RETAINER LH, W/A 25BD250 Wheel |
| 674219 | TUNE UP KIT – 25 BD250 WHEEL |
| 674220 | TUNE UP KIT – 25 BD250 WHEEL |
| 674265 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674268 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674269 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674307 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674308 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674309 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674530 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 675420 | IMPELLER – BD WHEEL |
| 675421 | CONTROL CAGE – BD WHEEL – 70 DEGREE |
| 675422 | CONTROL CAGE – BD WHEEL – 49 DEGREE |
| 675423 | CENTERING PLATE – BD WHEEL |
| 675768 | HUB ASSEMBLY “BD” WHL w/ 1-7/8″ TAPERLOCK |
| 675769 | HUB ASSEMBLY “BD” WHL w/ 2-1/8″ TAPERLOCK |
| 675770 | HUB ASSEMBLY “BD” WHL w/ 2-3/8″ TAPERLOCK |
| 675810 | HUB ASSEMBLY “BD” WHL w/ 1 5/8″ TAPERLOCK |
| 675811 | HUB ASSEMBLY “BD” WHL w/ 2 1/2″ TAPERLOCK |
| 676119A | BD Wheel – L/H Side Liner |
| 676120A | BD Wheel – R/H Side Liner |
| 676121A | BD Wheel – Top Side Liner |
| 676185 | END LINER – 25″ BD WHEEL |
| 676186 | CURVED TOP LINER – 25″ BD WHEEL |
| 676660 | CONTROL CAGE – BD WHEEL – 100 DEGREE |
| 676710 | LINK PIN – 27 X 36 |
| 676660 | CONTROL CAGE – BD WHEEL – 100 DEGREE |
| 676710 | LINK PIN – 27 X 36 |
| 677385 | TUNE UP KIT – 25 BD250 WHEEL |
| 677636 | RUBBER CONVEYOR BELT, Drain Hole 0.44″ dia, TBR 6 |
| 677653 | IMPELLER BOLT – BD WHEEL (also 682988) |
| 677861 | BLADE BD WHEEL 15″ (LOW SPEED) |
| 677877 | TUNE UP KIT – 25BD150 WHL |
| 677878 | TUNE UP KIT 25BD150 |
| 677879 | TUNE UP KIT – 25BD150 WHL |
| 677881 | Finger Seals, Urethane, 4″ wide, 18″ length |
| 677896 | Finger Seals, Urethane, 4″ wide, 19″ length |
| 677898 | 15″ BD TOP LINER |
| 677901 | 15″ BD END LINER |
| 677947 | Finger Seals, Urethane, 4″ wide, 22″ length |
| 677948 | Finger Seals, Urethane, 4″ wide, 24″ length |
| 678051 | TUNE UP KIT |
| 678052 | TUNE UP KIT |
| 678237 | TUNE UP KIT |
| 678238 | TUNE UP KIT |
| 679099 | TUNE UP KIT |
| 679747 | Blade, 50BD210 (8 p/set) |
| 680148 | BELT ASSY/ELEVATOR |
| 680459 | Finger Seals, Urethane, 4″ wide, 26″ length |
| 680460 | Finger Seals, Urethane, 4″ wide, 27″ length |
| 680461 | Finger Seals, Urethane, 4″ wide, 28″ length |
| 680462 | Finger Seals, Urethane, 4″ wide, 30″ length |
| 680463 | Finger Seals, Urethane, 4″ wide, 31″ length |
| 680464 | Finger Seals, Urethane, 4″ wide, 32″ length |
| 680465 | Finger Seals, Urethane, 4″ wide, 34″ length |
| 680466 | Finger Seals, Urethane, 4″ wide, 36″ length |
| 680467 | Finger Seals, Urethane, 4″ wide, 46″ length |
| 680468 | Finger Seals, Urethane, 4″ wide, 39″ length |
| 680469 | Finger Seals, Urethane, 4″ wide, 40″ length |
| 680470 | Finger Seals, Urethane, 4″ wide, 44″ length |
| 680471 | Finger Seals, Urethane, 4″ wide, 45″ length |
| 680472 | Finger Seals, Urethane, 4″ wide, 48″ length |
| 68098 | RUBBER CONVEYOR BELT, Drain Hole 0.25″ dia, 27 x 36 |
| 680990 | Plow Bolt, 5/8″-11 X 3″, #3 Grd 8 |
| 680991 | Plow Bolt, 3/4″ x 3-1/4″ Grd 8 |
| 681318 | LINK – RH 7 & 14 SUPER I (use 158009) |
| 681319 | LINK – LH 7 & 14 SUPER I (use 158010) |
| 681320 | LINK – RH SUPER II (ALSO 418966) |
| 681321 | LINK -LH 14 SUPER II (ALSO 418967) |
| 681322 | LINK – RH 22, 28 & 34 SUPER II (use 424562) |
| 681323 | LINK – LH 22, 28 & 34 SUPER II (use 424563) |
| 681324 | LINK – RH 22, 28 & 34 SUPER (use 294216) |
| 681325 | LINK – LH 22, 28 & 34 SUPER (use 294215) |
| 681418A | Impeller 50BD/50R |
| 681419A | Control Cage 70 Deg CW & CCW |
| 681696 | FILTER CARTAGES |
| 68210 | RUBBER CONVEYOR BELT, Drain Hole 0.19″ dia, 27 x 36 |
| 682231 | SEAL RING – BD WHEEL |
| 68274 | RUBBER CONVEYOR BELT, Drain Hole 0.19″ dia, 20 x 27 |
| 68275 | RUBBER CONVEYOR BELT, Drain Hole 0.25″ dia, 20 x 27 |
| 682750 | TUNE UP KIT |
| 682976 | TUNE UP KIT, 50BD210 |
| 682988 | IMPELLER BOLT EZ fit (USE 677653) |
| 683000 | BLADE BD WHEEL 13″ |
| 683135 | Elevator Belt Bucket Assembly, 8 5/8″ wide x 52′ long, 8″ x 5″ Buckets on 10.00″ vertical centers |
| 683432 | TUNE UP KIT 25 BDL 195 |
| 683466 | TUNE UP KIT 25BD 130 |
| 683467 | TUNE UP KIT 25 BD 130 |
| 683487 | LOCK WASHER – BD/EZ WHEEL |
| 683596 | TUNE UP KIT 25 BD150 |
| 684136 | CONTROL CAGE – BD WHL – 30 deg |
| 684138 | TUNE UP KIT – 25 BDL 195 |
| 684921 | TUNE UP KIT – 25 BDL 195 WHEEL |
| 684934 | TUNE UP KIT 25 BDL 150 |
| 685067 | TUNE UP KIT 25 BDL 150 |
| 685277 | Bare Wheel, BD |
| 685782 | BLADE – BD WHEEL – 15″ (HI SPEED) |
| 686154 | Blade, 50BD, (8 p/set) |
| 686208 | TUNE UP KIT 25 BD 130 |
| 686216 | BARE WHEEL ASSEMBLY – BD WHEEL (HI SPEED) |
| 686216/675770 | Bare Wheel Assembly – BD wheel w/hub attached |
| 686310 | BD LONG END LINER 23″ long |
| 686357 | TUNE UP KIT 25 BD 195 WHEEL (HI SPEED) |
| 686764 | TUNE UP KIT – 25 BD 150 WHEEL (HI SPEED) |
| 68691 | LINK/OFFSET |
| 686914 | TUNE UP KIT, 50BD250, 70 DEGREE CW & CCW |
| 68692 | LINK/COUPLING |
| 68693 | LINK/OFFSET |
| 68694 | LINK/COUPLING |
| 68695 | LINK/OFFSET |
| 68696 | LINK/COUPLING |
| 686969 | TUNE UP KIT 25 BDL 150 |
| 68699 | LINK/OFFSET |
| 68701 | LINK/COUPLING |
| 68704 | LINK/OFFSET |
| 68705 | LINK/COUPLING |
| 688343 | TUNE UP KIT 15″ BD WHEEL (HI SPEED) |
| 688459 | TUNE UP KIT 25 BD 150 |
| 689101 | FUNNEL, WORK GUIDE |
| 690340 | Mill Belt w/ 5/16th drain holes |
| 691597 | BLADE – BD WHEEL – 19 1/2″ (HI SPEED) |
| 691823 | TUNE UP KIT – 25 BD 150 WHEEL (HI SPEED) |
| 691836 | TUNE UP KIT 25 bd 150 |
| 692251 | TUNE UP KIT 25 BDL 150 |
| 692991 | Link, LH (Use 424562) |
| 692992 | Link, RH (Use 424563) |
| 693393 | BARE WHEEL ASSEMBLY – BD WHEEL |
| 693467 | BD END LINER 18-1/2″LONG |
| 694503 | TUNE UP KIT BD 195 WHEEL |
| 694723 | TUNE UP KIT 25 BD 195 WHEEL (HI SPEED) |
| 695357 | TUNE UP KIT – 25M150 |
| 695619 | TUNE UP KIT 25 BDL 195 |
| 695838 | SPROCKET, Conveyor Drive – 7 & 14 SUPER use 193525 |
| 696116 | TRACTION WHEEL – 7 & 14 SUPER, 14 SUPER II (use 193526) |
| 696233 | HUB, BD WHEEL, ASSEMBLY VERTICAL MOUNT |
| 697538 | TUNE UP KIT 25BD 250 |
| 698417 | TUNE UP KIT 25BDL 150 |
| 698876 | Pusher Finger |
| 699062 | TUNE UP KIT 25 BDL 195 |
| 6×12 spec | CABINET LINER w/ insert |
| 7001 | Wheel Spindle Kit – Long Oil |
| 7002 | Barrel Head, Trunnion Bearing Kit 22/28/34 Super I & II |
| 7003 | Barrel Head, Trunnion Bearing Kit 7 & 14 Super I & II |
| 7004 | Idler & Take Up Shaft Bearing Kit |
| 7004-1 | Mill Drive Shaft Bearing Kit with Oil seal |
| 7004114 | BOLT, IMPELLER |
| 7005 | Idler & Take Up ShaftBearing Kits |
| 7005-1 | Mill Drive Shaft Bearing Kit with Oil seal |
| 7006 | Bearing Kit |
| 7055 | Bearing |
| 716248 | Head Pulley for 34 super 3 HTS |
| 721287 | Tune Up Kit 25 BDL 195 |
| 723881 | Taper Lock Bushing |
| 726007 | LINK RH 22, 28 & 34 SUPER II (also 424562) |
| 726008 | LINK LH 22, 28 & 34 SUPER II (also 424563) |
| 728221 | Liner, 12 x 12 with insert (USE 12X12LINERSPEC) |
| 728594 | Taper Lock Bushing |
| 72951 | Elevator Boot Pulley 20×27 |
| 729955 | Liner, End 35 140/ 160/ 180/ End liner |
| 729960 | Liner, Top 35 140/ 160/ 180 Top Liner |
| 729982A | IMPELLER |
| 730032A | CONTROL CAGE, 70deg |
| 730082A | BLADE SET, 8/set |
| 730103 | Blade Set, 35BD180, 8/set |
| 730289 | Tune Up Kit, 35BD160 49 deg cage |
| 730290 | Tune Up Kit, 35BD160, 70 deg Control Cage |
| 730291 | TUNE UP KIT – 35BD160 100 deg cage |
| 730981 | CONTROL CAGE 35 DEG RLM |
| 730984 | SEAL RING use S900658-2 |
| 731244A | CONTROL CAGE, 30 degree, CW, CCW |
| 731245A | CONTROL CAGE, CW, CCW, 49 degree (BCT#B12849) |
| 731246A | CONTROL CAGE, 100 degree, CW, CCW |
| 731262 | Blade Set, 35BD1140, 8/set |
| 731274 | TUNE UP KIT – 35BD160 |
| 731283 | TUNE UP KIT – 35BD140 30 deg cage (also 737517) 35EZ140 |
| 731284 | TUNE UP KIT – 35BD140 49 deg cage (also 737518) 35EZ140 |
| 731285 | TUNE UP KIT – 35BD140 70 deg (also 737519) 35EZ140 |
| 731286 | TUNE UP KIT – 35BD140 100 deg cage (also 737520) 35EZ140 |
| 731328 | TUNE UP KIT – 35BD180 35EZ180 p/n 737536 30 deg |
| 731329 | TUNE UP KIT – 35BD180 35EZ180 p/n 737537 49 deg |
| 731330 | TUNE UP KIT – 35BD180 35EZ180 p/n 737538 70 deg |
| 731331 | TUNE UP KIT – 35BD180 35EZ180 p/n 737539 100 deg |
| 732153 | Liner, End 35EZ Long |
| 732155A | Liner, Top – Long 35EZ |
| 733441 | TUNE UP KIT, 25BD 195Wheel |
| 733972 | BLADE SET, 8/set (use 6-750047 also 6-900011) |
| 733973 | BLADE SET, 8/set, (use 6-750048 also 6-900012) |
| 733974 | BLADE SET, 4/set, (use 6-750048) 4 per set |
| 733975 | BLADE SET, 4/set, (use 6-750047)4 per set |
| 733976 | BLADE SET, 4set, (use 6-750047) |
| 733977 | BLADE SET, 4/set, (use 6-750047) |
| 733978 | BLADE SET, 8/set CCW (use 6-920015) |
| 733979 | BLADE SET, 8/set CW (use 6-920032) |
| 735542 | BLADE SET, 8/set (use 685782) |
| 735961 | Impeller Bolt for M, RLM, BD wheels (USE 158063) |
| 736807 | SPOUT SEAL 25EZ fit (use S-900658-2) |
| 737521 | TUNE UP KIT – 35 EZ160 EZ Fit Wheel, 30 degree |
| 737522 | TUNE UP KIT – 35 EZ 160 EZ Fit Wheel, 49 deg |
| 737523 | TUNE UP KIT – 35 EZ160 EZ Fit Wheel, 70 degree 35EZ160 |
| 737524 | TUNE UP KIT – 35 EZ160 EZ Fit Wheel, 100 degree |
| 737560 | 35EZ bare wheel 40-50HP |
| 737645A | LINER/TOP – 25EZ E 130-140 |
| 737646A | LINER/END – 25EZ E 130-140 |
| 737648A | IMPELLER/25EZ 8 blade |
| 737661A | impeller/25EZ 12 blade |
| 737717A | Control Cage 25EZ 30deg |
| 737718A | CONTROL CAGE/25EZ 49 DEG |
| 737719A | control cage 70 deg 25EZ |
| 737824A | LINER, END, 25 E 155 – 175 |
| 737825A | Liner, Top 25EZ 155-175 |
| 738872 | Bare Wheel/8 blade 25EZ 7.5-30HP |
| 738873 | Bare Wheel 8 blade 25EZ 40-50HP |
| 739164 | 25EZ155 8 blade 49 deg cage Tune up kit |
| 739165 | 25EZ155 8 blade 70 deg cage Tune up kit |
| 739168 | 25EZ175 8 blade 49 deg cage Tune up kit |
| 739169 | 25EZ175 8 blade 70 deg cage Tune up kit |
| 739290 | 25EZ130 8 blade 49 deg cage Tune up kit |
| 739291 | 25EZ130 8 blade 70 deg cage Tune up kit |
| 739523 | 25EZ140 12 blade 49 deg cage Tune up kit |
| 739524 | 25EZ140 12 blade 70 deg cage Tune up kit |
| 739527 | 25EZ155 12 blade 49 deg cage Tune up kit |
| 739528 | 25EZ155 12 blade 70 deg cage Tune up kit |
| 739531 | 25EZ175 12 blade 49 deg cage Tune up kit |
| 739532 | 25EZ175 12 blade 70 deg cage Tune up kit |
| 739535 | 25EZ140 8 blade 49 deg cage Tune up kit |
| 739536 | 25EZ140 8 blade 70 deg cage Tune up kit |
| 739665A | 25EZ200-270 Top Liner |
| 739666A | 25EZ200-270 End Liner |
| 740298 | 25EZ245 8 blade 70 deg cage Tune up kit |
| 740299 | 25EZ245 8 blade 49 deg cage Tune up kit |
| 740302 | 25EZ270 8 blade 49 deg cage Tune up kit |
| 740303 | 25EZ270 8 blade 70 deg cage Tune up kit |
| 740310 | 25EZ245 12 blade 49 deg cage Tune up kit |
| 740311 | 25EZ245 12 blade 70 deg cage Tune up kit |
| 740314 | 25EZ270 12 blade 49 deg cage Tune up kit |
| 740315 | 25EZ270 12 blade 70 deg cage Tune up kit |
| 74800 | Nut, Cap – Hardened (Use 226000) |
| 75312 | LINER BOLT ASSEMBLY |
| 75473 | RUBBER CONVEYOR BELT, Drain Hole 0.31″ dia, 27 x 36 |
| 75925 | Skew Roller, Conveyor |
| 76291 | HARDENED CAP NUT (FLAT TOP) 3/8-16 11/16″ |
| 78010 | PULLEY, HEAD 9″X 25″ |
| 78013 | PULLEY,BOOT 9″X 25″ |
| 79883 | RUBBER CONVEYOR BELT, Drain Hole 0.50″ dia, 27x 36 |
| 79950 | HARDENED CAP NUT (RD. TOP) 1/2″-13, 7/8″ Hex, 1-1/4 Tall |
| 8 X 12 | CABINET LINER |
| 8 X 12 spec | CABINET LINER w/ insert |
| 803600882 | Filter cartridges |
| 833600882 | FILTER CARTridges |
| 83491 | SKIP HOIST ROLLER |
| 84552 | Front Idler Rollers |
| 84553 | Take-up Shaft Rollers |
| 85703 | SPROCKET, Conveyor Drive |
| 861985 | TUNE UP KIT BD/RLM CONVERSION |
| 894723 | TUNE UP KIT |
| 92205 | Oil Seal |
| 93203 | Oil Seal Drive Side of drive shaft |
| 93293 | Belt Pulley Guides 27×36 Rubber Belt |
| 93295 | Belt Pulley Guides 27×36 Rubber Belt |
| 93426 | CONTROL CAGE – Q WHL-70 DEG-SQ- USE 200900 WE29 |
| 93794 | Bushing for 20×6 Pulley p/n 93293 |
| 93794 225682 | Boot Pulley |
| 94382 | Roller Bearing with inner race |
| 94383 | Oil Seal |
| 94403 | Blast Gate 4″ |
| 94832 | PILLOW BLOCK ASSEMBLY – M-WHEEL |
| 94870 | Roller Bearing |
| 94873 | Ball Bearing |
| 94876 | BEARING END CAP – M WHEEL – SHORT |
| 94877 | Q SHAFT |
| 94878 | BEARING HOUSING – M WHEEL – LONG |
| 94880 | BEARING SPACER LONG |
| 94881 | SHEAVE LOCK CAP |
| 95037 | Oil Seal |
| 95868 | WHEEL BEARING ASSEMBLY – “Q” – OIL OR GREASE |
| 97963 | SPROCKET 48×42 (2.558 BORE) |
| 97964 | SPROCKET 48×42 (1.964 BORE) |
| 97965 | SPROCKET 48×42 (3.496 BORE) |
| 97974 | SPROCKET – 27 X 36 |
| 98277 | Flanged Bearing |
| 98502 | BARREL HEAD SLEEVE |
| 98812 | SHEAVE – STYLE B |
| 99292 | ELEVATOR HEAD PULLEY 27 X 36 |
| BP-6267 | Hub |
| BP-6525 | Bare Wheel, CW |
| BP-6529 | Bare Wheel, CCW |
| E3KIT16/49-A | E Wheel TUK 49DEG (M3 wheel) |
| E3KIT16/70-A | E Wheel TUK 70DEG (M3 Wheel) |
| M-2093-II | A Blade Invest cast blades 8 per set (M3 Wheel) 16″ |
| MP13.5 | blade set 8 |
| M-600207 | Roller |
| T964776 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| T964777 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| X000041 | FELT SEAL 22 3/4″ x 3/4″ wide x 1/2″ thick |
Pangborn – Parts list
| P/N | DESCRIPTION |
|---|---|
| 195747-4RI | TUNE UP KIT 195-4 RI CCW |
| 26-590038 | IDLER ROLLER – 15 & 20 GN(also 6-590038) |
| 26-620473 | INNER RUNNERHEAD |
| 26-750025 | CW OUTER RUNNERHEAD #3 & 4RK |
| 26-750055 | CW OUTER RUNNERHEAD |
| 26-750083 | CCW OUTER RUNNERHEAD #3 & 4RK |
| 26-750087 | CCW OUTER RUNNER HEAD |
| 26-750098 | OUTER RUNNERHEAD 130 2 RK |
| 26-750099 | OUTER RUNNERHEAD 130 2 RK |
| 26-750198 | CCW OUTER RUNNER HEAD |
| 26-750199 | CW OUTER RUNNERHEAD 12-1/2″ DIA |
| 26-780194 | CCW OUTER RUNNERHEAD 195-3RG |
| 26-840043 | CW/CCW OUTER RUNNERHEAD 195-4I |
| 26-870020 | OUTER RUNNERHEAD |
| 26-870021 | OUTER RUNNERHEAD |
| 26-870046 | OUTER RUNNERHEAD |
| 26-880018 | OUTER RUNNERHEAD |
| 26-880019 | OUTER RUNNERHEAD |
| 26-890052 | OUTER RUNNERHEAD |
| 26-920021 | OUTER RUNNERHEAD |
| 3060153 | O RING Rim – Loc |
| 36-610431 | SPINDLE FLANGE (same as/use 6-610431) |
| 36-620465 | INNER RUNNER HEAD 180-3RK & 4RK |
| 36-630495 | SPROCKET |
| 36-890052 | OUTER RUNNERHEAD |
| 5040146 | Felt Seal |
| 1000006-C | Rim Loc Tune up kit 14-8 WHL 50 |
| 6-000025-8 | Blade, Rim Loc, 8/set, 15″ |
| 6-000024-8 | Blade, Rim Loc, 8/set, 14″ |
| 6-000024-6 | Blade Rim Loc 6 per set |
| 6-000026 | Impeller |
| 6-000027 | Rear Seal Plate- |
| 6-000028 | Centering Plate- rim loc |
| 6-000029 | Control Cage, Rim Loc |
| 6-010000 | Impeller, Rim Loc |
| 6-080052 | Liner Top Genesis |
| 6-080053 | Liner/End Short Genesis |
| 6-080054 | Liner/End Long Genesis |
| 6-580285 | Pulley, Boot, 32 GN |
| 6-580817 | VANE CW-2 RG – 140DD WHL |
| 6-590033 | LINK RH – 15 &20 GN |
| 6-590034 | LINK LH – 15 & 20 GN |
| 6-590038 | IDLER ROLLER 15, 20 GN (ALSO 26-590038) |
| 6-590039 | DRIVE SPROCKET, Conveyor – 15 & 20 GN |
| 6-590192 | VANE CW – 5RG |
| 6-591163 | VANE CCW – 2 RG – 140DD WHL |
| 6-592503 | Link Pins |
| 6-610278 | SHAFT (also M610278) |
| 6-610424 | REAR SLINGER |
| 6-610425 | GREASE RING STEEL |
| 6-610426 | GREASE RING BRASS |
| 6-610427 | GREASE RING |
| 6-610428 | SEAL RING |
| 6-610429 | BEARING CAP, REAR |
| 6-610430 | BEARING CAP, FRONT |
| 6-610431 | Spindle Flange |
| 6-610438 | RING, LABYRINTH |
| 6-610463 | BEARING ASSEMBLY HOUSING |
| 6-610569 | DEFLECTOR 210-5RI |
| 6-610643 | DEFLECTOR 195-4RI |
| 6-610648M | IMPELLER CW – 4RI & 4RK |
| 6-610649M | IMPELLER CASE CW – 4RI |
| 6-610669 | VANE CW 4 RI |
| 6-610679 | DEFLECTOR 195-3RI |
| 6-610684 | CW VANE 195 3RI |
| 6-610694 | IMPELLER 3 RI – CW 6-610742 |
| 6-610695 | IMPELLER CASE 3 RI – CW & CCW 6-610695 |
| 6-610742 | IMPELLER 3RI – CCW 6-610694 |
| 6-610744 | CCW VANE 195-3RI |
| 6-610745 | IMPELLER CASE 3 RI – CCW use 6-610695 |
| 6-610746M | IMPELLER CCW – 4RI & 4RK use 6-610648M |
| 6-610747 | VANE CCW 4 RI |
| 6-610749 | IMPELLER CASE CCW – 4RI |
| 6-610663 | LOWER END LINER |
| 6-612736 | BEARING ASSEMBLY W/O HUB p612736 |
| 6-620412 | Liner, 12 x 12 Shiplap w/ hole (use 223306) |
| 6-620463 | CW OUTER RUNNERHEAD 195-4RI |
| 6-620464 | CW OUTER RUNNERHEAD 195-3RI |
| 6-620465 | INNER RUNNER HEAD 180/195-4RI |
| 6-620467 | INNER RUNNER HEAD 195-3RI |
| 6-620472 | CW OUTER RUNNERHEAD 195-5RI |
| 6-620473 | INNER RUNNER HEAD 195-4RI |
| 6-620474 | TOP LINER |
| 6-620504 | CCW OUTER RUNNERHEAD 195-4RI |
| 6-620505 | CCW OUTER RUNNERHEAD 195-5RI |
| 6-620509 | CCW OUTER RUNNERHEAD 195-3RI |
| 6-620516 | UPPER END LINER (BP-2611) |
| 6-620930 | IMPELLER CASE CW – 4RI |
| 6-620934 | SPOUT CLAMP (H-971210) |
| 6-630491 | SPROCKET |
| 6-630492 | SPROCKET 12 GN |
| 6-640362 | SPROCKET 6 GN |
| 6-640921 | Vane Set, CW |
| 6-640922 | Vane Set, CCW |
| 6-650664 | Liner |
| 6-660230 | BEARING LOCKWASHER 3 GO |
| 6-660245 | FEED SPOUT |
| 6-660049-1 | 12 x 15 Cabinet Liner w/2 sides shiplap |
| 6-680621 | Liner, Lower End |
| 6-690376 | 1/2″ FLANGED CAST NUT (also 6-920006 – USE 220040) |
| 6-700003 | LINER PLATE, 10 x 15 ship lap |
| 6-700010 | LINER, 4 X 15 SHIP LAP |
| 6-700097 | Plow Bolt, 3/4″-10 x 3-1/4″, #3 head |
| 6-700097/1 | Lock Washer, 3/4″ |
| 6-700097/2 | Nut 3/4″, grd # 2 |
| 6-700104 | LOWER END LINER (W/EARS) |
| 6-700216C | LOWER END LINER |
| 6-730575 | 3 GO BARREL R & L LINK |
| 6-730602 | BEARING HOUSING 2 RK 1 |
| 6-730603 | REAR BEARING CAP 2 RK – 1 |
| 6-730604 | FRONT BEARING CAP 2 RK-1 |
| 6-730605 | SEAL RING 2 RK – 1 |
| 6-730606 | GREASE RING 2 RK – 1 |
| 6-730607 | GREASE RING 2 RK-1 |
| 6-730614 | SPINDLE FLANGE 2 RK – 1 |
| 6-730620B | IMPELLER CASE universal CW CCW |
| 6-730637B | IMPELLER CASE – CCW – 140DD USE 6-730620M |
| 6-732599 | 2RK-1 Bearing Assembly |
| 6-750026 | IMPELLER CASE CW – 4RK USE 6-750029M |
| 6-750027 | DEFLECTOR 3RK – 4 RK |
| 6-750029 | IMPELLER CASE CCW – 4RK |
| 6-750047 | VANE CW – 4RK |
| 6-750048 | VANE CCW – 4RK |
| 6-750052 | VANE CW – 3RK (USE 6-900013) |
| 6-750053 | VANE CCW – 3RK (USE 6-900014) |
| 6-750056 | IMPELLER CW – 3RK |
| 6-750057 | IMPELLER CCW – 3RK (USE 6-750056) |
| 6-750063 | IMPELLER CASE – CCW – 3RK (also 6-900012) |
| 6-750064 | IMPELLER CASE CW – 3 RK (USE 6-750063M) |
| 6-750100S | VANE CW – 2RK – 130DD WHL (USE PN 6-920032) |
| 6-750101S | VANE CCW – 2 RK – 130DD WHL (USE PN 6-920015) |
| 6-750102-F | INNER RUNNERHEAD 130-RK |
| 6-750103 | DEFLECTOR |
| 6-750104B | IMPELLER CW&CCW-130DD/140DD |
| 6-750200 | IMPELLER CASE – CW – 130DD use 6-750200M |
| 6-750200M | IMPELLER CASE – CW AND CCW – 130DD |
| 6-750201 | IMPELLER CASE CCW – 130DD Use 6-750200M |
| 6-770137 | OUTER RUNNERHEAD |
| 6-780194 | CW OUTER RUNNERHEAD 195-3RG |
| 6-800076 | TOP END LINER |
| 6-800077 | BOTTOM END LINER |
| 6-800078 | TOP LINER |
| 6-800097 | MIDDLE SIDE LINER FRONT |
| 6-800194 | Liner, Top, USE Astech’s p/n 6-800078 |
| 6-820041 | LINER, BOTTOM END |
| 6-820042 | LINER, TOP END |
| 6-850049/50 | VANE CW (USE 6-750047) |
| 6-850065 | IMPELLER CASE |
| 6-870007 | TOP LINER 130 DD-2RK |
| 6-870008C | LOWER END LINER |
| 6-870015 | UPPER END LINER 130 DD |
| 6-870029 | MIDDLE SIDE LINER REAR |
| 6-900011 | VANE CW (Use 6-750047) |
| 6-900012 | VANE CCW ( use 6-750048) |
| 6-900013 | VANE CW – 3RK (also 6-750052) |
| 6-900014 | VANE CCW – 3RK (also 6-750053) |
| 6-910046 | OUTER RUNNERHEAD |
| 6-920006 | 1/2″ FLANGED CAST NUT (USE 220040) |
| 6-920015 | VANE CCW also 6-750101 |
| 6-920032 | VANE CW also 6-750100 |
| 6-940001 | Vane 12/set 240/265 DD 2RI (also M940039) |
| 6-960001 | Liner, Top |
| 69617 | Elevator Bucket Assembly, 12 GNR, 1/4″ drain holes |
| 6-970012 | DEFLECTOR |
| 6-970036A | UPPER END LINER |
| 701684-1 | PLOW BOLT ADAPTER, 1 1/2 X 1 3/4, 3/4″ HOLE,23 GN |
| 701684-2 | PLOW BOLT ADAPTER, 1 3/4 X 1 3/4, 3/4″ HOLE, 26GN, 32 GN |
| 701684-3 | PLOW BOLT ADAPTER, 1 1/2 X 1 3/4, 5/8″ HOLE, 23 GN |
| 701684-4 | PLOW BOLT ADAPTER, 1 3/4 X 1 3/4, 5/8″ HOLE, 26GN, 32 GN |
| 79772 | Roller, Idler 18GN-1 20GN |
| 84552 | IDLER ROLLER – 32 & 34 GN |
| 84553 | TAKE-UP ROLLER – 32 & 34 GN |
| 85703 | DRIVE SPROCKET – 32 & 34 GN |
| BM-151440 | BARREL HEAD BEARING HOUSING |
| DP47398 | RETAINER |
| DP-47403 | CAP |
| DP49129 | CAP |
| DP-49707 | ROLLER |
| DP-49708 | ROLLER SHAFT – REAR |
| DP-49709 | COVER/BEARING 3GO |
| DS-49710 | SPACER THRUST ROLLER |
| DV 391444 | SQUARE LOCK PIN |
| H-000987 | Housing Cover |
| H-000991 | Case Adaptor |
| I-580320 | Cast Iron Elevator Bucket, 8X5 |
| L-580004 | LINK RH (14583) – 26, 32, & 34 GN |
| L-580005 | LINK LH (14582) – 26, 32, & 34 GN |
| M-600206 | Conveyor Drive Sprockets |
| M-600207 | ROLLER – TRACTION WHEEL |
| M-610278 | SHAFT ( USE 6-610278) |
| M-701210 | SPINDLE, SHAFT 2 RK-1 |
| M-770549 | Mill Belt, 12 GNR, specify drain hole size- (Endless) |
| M-770549-1 | Mill Belt, 12 GN Straight (not endless) spliced |
| M-880785 | INNER RUNNERHEAD |
| M-911194 | INNER RUNNERHEAD |
| M-920475 | INNER RUNNERHEAD |
| M-920826 | INNER RUNNERHEAD |
| M-940630 | OUTER RUNNERHEAD |
| M-940631 | OUTER RUNNERHEAD |
| M-940730-3 | Mill Belt, Tumbler Belt 3GN Rubber 1/4″ drain holes |
| M-941145 | OUTER RUNNERHEAD |
| M-950141 | INNER RUNNER HEAD 240-5RI |
| P-580002 | LINK PIN – 26, 32, & 34 GN |
| P-580003 | LINK PIN (6-580003) |
| P-6000024-6 | Vane Set 14″ Dia. (6) |
| P-6000024-8 | vane set 8 Rim loc 14″ |
| P-6000025-8 | 15″ RIMLOC 8 P/Set |
| P-600985 | SPROCKET |
| P-612736 | PANGBORN BEARING W/O SPINDLE FLANGE |
| P-621766 | TAPER LOCK BUSHING (3020 2 7/16) |
| P-640921 | TUNE UP KIT |
| P-640922 | TUNE UP KIT |
| P-732599 | BEARING ASSEMBLY W/O SPINDLE FLANGE |
| P-740960 | LINK PIN |
| P-870060 | IMPELLER DRIVER |
| P-870247 L/S | TUNE UP KIT 4 RK CW |
| P-870248 L/S | TUNE UP KIT 4RK CCW |
| P-870249 L/S | TUNE UP KIT 3 RK CW |
| P-870250 L/S | TUNE UP KIT 3 RK CCW |
| P-870251 | TUNE UP KIT |
| P-870252 | TUNE UP KIT |
| P-870253 | TUNE UP KIT 3RI CW |
| P-870254 | TUNE UP KIT 3RI CCW |
| P-870255 | TUNE UP KIT 195-4 RI CW |
| P-880069 | FILTER CARTRIDGE, PANGBORN |
| P-880116 | Bushing |
| P-960947 | IMPELLER DRIVER |
| P-980607 | INNER RUNNERHEAD |
| P-980608 | INNER RUNNERHEAD |
| R-543170000 | 5/8″ x 1-1/4″ IMPELLER BOLT |
| R-543415000 | 5/8″ LOCK WASHER (USE 500117) |
| R-54316800 | Impeller Bolt |
| S-870253 | Tune Up Kit 130DD2RK CCW (Short Kit) |
| S-870254 | Tune Up Kit 130DD2RK CW (Short Kit) |
| RA-P4 | VANE SPRING (244) |
| S-471367-6 | taperlock bushing 2517 2 1/8 |
| S-563341 | Nut, Square 1/2-13 (220042 or 5000860) |
| S-590047-3 | Roll Pin |
| S-592503 | LINK PIN 15 & 20 GN (6-592503) |
| S-610488 | ROUND LOCK PIN |
| S-612251 | BEARING, ROLLER |
| S-612256 | SEAL RING (Use to S-900658-2 flat o-ring) |
| S-612274 | SEAL, O-RING |
| S-634053 | Boot Pulley with 1-7/16 Bushing |
| S-634054 | Head Pulley with 2-716 Bushing |
| S-640921 | TUNE UP KIT CW, 3 RI |
| S-640922 | TUNE UP KIT CCW, 3 RI |
| S-701458 | VANE SPRING150 4RK |
| S-710031 | Felt Seal – 4.625″ X 3.750″ID X 5/8″ |
| S-720703 | VANE LOCK PIN (ROUND) |
| S-721105 | SEAL RING, (USE Astech p/n S-900658-2) |
| S-801192 | Plow Bolt 1/2″-13 x2-1/2″ #3 head |
| S-870048 | SPACER |
| S-870247 L/S | TUNE UP KIT 4 RK CW |
| S-870248 L/S | TUNE UP KIT 4 RK CCW |
| S-870249 L/S | TUNE UP KIT 3RK CW |
| S-870250 L/S | TUNE UP KIT 3RK CCW |
| S-870253 | TUNE UP KIT 3 RI |
| S-870254 | TUNE UP KIT 3 RI |
| S-870255 | TUNE UP KIT 4 RI CW |
| S-870256 | TUNE UP KIT 4 RI CCW |
| S-880407 | LINK PIN |
| S-900658-1 | seal ring (o-ring) |
| S-900658-2 | SEAL RING (replaces S-612256) |
| V-631073 | HARDENED ACORN NUT, 1/2-13, 15/16″ Tall, 7/8 Hex |
| V-631074 | HARDENED ACORN NUT, 3/8-16, 3/4″ Tall, 3/4 Hex |
BCP – Parts list
| P/N | DESCRIPTION |
|---|---|
| 01176 | TUNE UP KIT |
| 102028 | CONTROL CAGE – 37 DEGREE USE 52127 |
| 102029 | Control Cage Adaptor USE PN C102CCA |
| 102127 | CONTROL CAGE – 49 DEGREE (USE 52128) |
| 102130 | Control Cage Adaptor USE PN C102CCA |
| 102647 | TUNE UP KIT – 19.50″ WHEEL |
| 102648 | TUNE UP KIT – 19.50″ WHEEL |
| 102649 | TUNE UP KIT – 19.50″ WHEEL |
| 103452 | WHEEL BARE 12 BLADED TAPER |
| 104897 | 15″ DOUBLE TAPER BLADE, 12/SET |
| 104900 | 12 V-GROOVE Blade |
| 104902 | 19.5″ DOUBLE TAPER BLADE,12/SET |
| 104903 | 24″ DOUBLE TAPER BLADE,12/SET |
| 104905 | 26.5″ DOUBLE TAPER BLADE, 12/SET |
| 105396 | LINER, 19 1/4″ long |
| 106316 | Elevator Belt Assembly |
| 106779 | 12.5″ DOUBLE TAPER BLADE, 12/SET |
| 109705 | TUNE UP KIT DT – 15″ 12 BLADE 37DEG |
| 109706 | TUNE UP KIT DT – 15″ 12 BLADE 49DEG |
| 109707 | TUNE UP KIT DT – 15″ 12 BLADE 70DEG |
| 109776 | TUNE UP KIT DT – 13.5″ 12 BLADE 37DEG |
| 109777 | TUNE UP KIT DT – 13.5″ 12 BLADE 49DEG |
| 109778 | TUNE UP KIT DT – 13.5″ 12 BLADE 70DEG |
| 109779 | Tune up Kit DT – 17″ 12 V-GROOVE 37 DEG |
| 109780 | TUNE UP KIT 17″ 12 V-GROOVE 12 BLADE 49 DEG |
| 109781 | Tune up Kit 17″ 12 V-GROOVE 12 BLADE 70 DEG |
| 109782 | TUNE-UP-KIT/19-1/2″ 12-BLADE 37-DEG |
| 109783 | TUNE-UP-KIT/19-1/2″ 12-BLADE 49-DEG |
| 109784 | TUNE-UP-KIT/19-1/2″ 12-BLADE 70-DEG |
| 109785 | TUNE UP KIT DT – 24″ V-GROOVE 12 BLADE 37DEG |
| 109786 | TUNE UP KIT DT – 24″ V-GROOVE 12 BLADE 49DEG |
| 109787 | TUNE UP KIT DT- 24″ V-GROOVE 12 BLADE 70DEG |
| 109788 | TUNE UP KIT DT – 26.5″ V-GROOVE 12 BLADE 37DEG |
| 109789 | TUNE UP KIT DT – 26.5″ V-GROOVE 12 BLADE 49DEG |
| 109790 | TUNE UP KIT DT – 26.5″ V-GROOVE 12 BLADE 70DEG |
| 110409 | TUNE UP KIT – 15.00″ WHEEL |
| C111266 | BCP Washer |
| 111625 | TUNE UP KIT DT – 12.5″ 12 BLADE 49DEG |
| 111651 | TUNE UP KIT DT – 12.5″ 12 BLADE 37DEG |
| 111652 | TUNE UP KIT 15″ 12 |
| 111653 | TUNE UP KIT DT – 12.5″ 12 BLADE 70DEG |
| 113181 | WHEEL BARE 8 BLADED TAPER |
| 113314 | 12.5″ DOUBLE TAPER BLADE, 8/SET |
| 113315 | 13.5″ DOUBLE TAPER BLADE, 8/SET |
| 113316 | 15″ DOUBLE TAPER BLADE, 8/SET |
| 113317 | BLADE/SET/17T *8 BLADES* |
| 113320 | 26.5″ double taper blade 8 set 25EZ same as 113321 |
| 113321 | 26.5″ DOUBLE TAPER BLADE, 8/SET |
| 113416 | TUNE UP KIT – 15.00″ WHEEL 12blade standard |
| 115468 | TUNE UP KIT DT – 15″ TAPER DOVE TAIL, 8/SET 49DEG |
| 115955 | TUNE UP KIT 37 deg |
| 115956 | TUNE UP KIT 49 deg |
| 115957 | TUNE UP KIT 70 deg |
| 115958 | 13 1/2″ BLADE (8/SET) |
| 116254 | TUNE UP KIT – 12.50″ WHEEL |
| 118451 | TUNE UP KIT DT – 15″ TAPER DOVE TAIL, 8/SET 37DEG |
| 118755 | TUNE UP KIT DT – 15″ 12 BLADE 49DEG |
| 118823 | TUNE UP KIT DT – 15″ 12 BLADE 49DEG |
| 123868 | TUNE UP KIT – 15.00″ WHEEL |
| 126618 | UPPER END LINER |
| 13068 | BLADE, 15″ (8/SET) |
| 131270 | HOUSING |
| 132644 | Elevator Belt Assembly |
| 134847 | TUNE UP KIT DT – 15″ 12 BLADE 70DEG |
| 134973 | TUNE UP KIT DT – 15″ 12 BLADE 37DEG |
| 139800 | TUNE UP KIT – 15.00″ WHEEL |
| 155316 | TUNE-UP-KIT/17″ 8-BLADE 49-DEG |
| 155816 | TUNE UP KIT DT – 13.5″ 8 BLADE 49DEG |
| 15634 | TOP LINER 15″ – ¾” THK |
| 15635 | UPPER END – ¾” THK |
| 15636 | LOWER END – ¾” THK |
| 15637 | Half Ring Liner (sold by the each) |
| 15683 | SEAL RETAINER (2 Required per Assembly) price per each |
| 15684 | CONTROL CAGE ADAPTER |
| 15728 | TAPER LOCK BUSHING |
| 15728-Dodge brand | TAPER LOCK BUSHING |
| 162854 | TUNE UP KIT DT – 26.5″ TAPER DOVE TAIL 8 BLADE 49DEG |
| 171367 | TUNE UP KIT DT – 26.5″ TAPER DOVE TAIL 8 BLADE 37DEG |
| 176246 | TUNE UP KIT DT – 13.5″ TAPER DOVE TAIL 8 BLADE 37DEG |
| 176341 | TUNE UP KIT DT – 12.5″ TAPER DOVE TAIL 8 BLADE 37DEG |
| 176931 | TUNE UP KIT – 15.00″ WHEEL |
| 178831 | TUNE UP KIT – 12.50″ WHEEL |
| 179273 | TUNE UP KIT – 15.00″ WHEEL |
| 187617 | Tune UP Kit – 26.5″ 70 deg |
| 18734 | Blade, 24.00″ 8 p/set |
| 18742 | IMPELLER BOLT (use 158063) fastenal P/N 1123562 |
| 18768 | 12½” BLADE (8/SET) |
| 18882 | TOP LINER 26½” – ¾” THK |
| 19216 | FELT SEAL |
| 20349 | FEED SPOUT – RLM WHL – 90 DEG (use 414396) |
| 20351 | IMPELLER BOLT (use 158063) |
| 20352 | IMPELLER LOCK WASHER ( use 165790) |
| 20353 | IMPELLER (use 414370) |
| 20354 | SEAL RING (use 448251) |
| 20355 | CONTROL CAGE (use 414371) |
| 20356 | CONTROL CAGE, 49 degrees, RLM (use 441985) |
| 20357 | CAP NUT, Hardened, Round Top 1/2-13×7/8″Long (use 79950) |
| 20375 | Clamping Lug, Control Cage, use 54520 |
| 21573 | FEED SPOUT – STRAIGHT use 423249 |
| 24018 | BARE WHEEL (8 BLADE) |
| 2712 | 12 X 12 CABINET LINER use 223306 |
| 2765 | 1/2″ CAST NUT FLANGED Use 220040 |
| 2766 | 6X12 LINER use 6x12liner |
| 30084 | 26½” BLADE (8/SET) |
| 30906 | Filter Cartridge 12.75 X 36.00 |
| 31206 | MID END LINER – ¾” THK |
| 37153 | 17″ BLADE (8 / SET) |
| 49475 | CENTERING PLATE |
| 49477 | IMPELLER (8 WINDOW) |
| 49607 | BARE WHEEL (12 BLADE) |
| 52127 | CONTROL CAGE (37°) 102028 |
| 52128 | CONTROL CAGE (49°) |
| 52129 | CONTROL CAGE (70°) |
| 1529A | Control Cage Spec 49 Deg |
| 54378 | Tune Up Kit (Same as 60019S) |
| 54379 | Tune up Kit 15″ 70 degree (Same as 60020S) |
| 54520 | CONTROL CAGE CLAMPING LUG |
| 57531 | IMPELLER (12 WINDOW) |
| 59036 | TOP LINER 15″ – 1″ THK |
| 59039 | TOP LINER 26½” – 1″ THK |
| 59566 | BLADES, 12/ SET |
| 60015 | TUNE UP KIT 12-1/2 WHL 8 BLADE |
| 60016 | TUNE UP KIT 12-1/2 WHL 8 BLADE |
| 60017 | TUNE UP KIT 12-1/2 WHL 8 BLADE |
| 60018 | TUNE UP KIT 15″ WHL 8 BLADE |
| 60019 | TUNE UP KIT 15″ WHL 8 BLADE |
| 60019S | TUNE UP KIT SPECIAL |
| 60020 | TUNE UP KIT 15″ WHL 8 BLADE |
| 60020S | TUNE UP KIT SPECIAL |
| 60021 | TUNE UP KIT |
| 60022 | TUNE UP KIT |
| 60023 | TUNE UP KIT |
| 60024 | TUNE UP KIT, 24″ WHL, 8 BLADE |
| 60025 | TUNE UP KIT, 24″ WHL, 8 BLADE |
| 60026 | TUNE UP KIT, 24″ WHL, 8 BLADE |
| 60027 | TUNE UP KIT 26-1/2″ WHL 8 BLADE 37 deg |
| 60028 | TUNE UP KIT 26-1/2″ WHL 8 BLADE 49 deg |
| 60029 | TUNE UP KIT 26-1/2″ WHL 8 BLADE 70 deg |
| 60030 | TUNE UP KIT 12-1/2″ WHL 12 BLADE 37 deg |
| 60031 | TUNE UP KIT 12-1/2″ WHL 12 BLADE 49 deg |
| 60032 | TUNE UP KIT 12-1/2″ WHL 12 BLADE 70 deg |
| 60033 | TUNE UP KIT 15″ WHL12 BLADE |
| 60034 | TUNE UP KIT 15″ WHL12 BLADE |
| 60035 | TUNE UP KIT 15″ WHL12 BLADE |
| 60036 | TUNE UP KIT 17 1/2″ WHL 12 blade 37 deg |
| 60037 | TUNE UP KIT 17 1/2 ” WHL 12 blade 49 deg |
| 60038 | TUNE UP KIT 17 1/2″ WHL 12 blade 70 Deg |
| 60039 | TUNE UP KIT, 24″ WHL, 12 BLADE 37 deg |
| 60040 | TUNE UP KIT, 24″ WHL, 12 BLADE 49 deg |
| 60041 | TUNE UP KIT, 24″ WHL, 12 BLADE 70 deg |
| 60042 | TUNE UP KIT 26-1/2″ WHL12 BLADE 37 deg |
| 60043 | TUNE UP KIT 26-1/2″ WHL 12 BLADE 49 deg |
| 60044 | TUNE UP KIT 26-1/2″ WHL 12 BLADE 70 deg |
| 60045 | 12½” BLADE (12/SET) |
| 60046 | 15″ BLADE (12/SET) |
| 60048 | Blade, 24.00″ 12 p/set |
| 60049 | 26½” BLADE (12/SET) |
| 60756 | UPPER END LINER – 1″ THK |
| 60757 | MID END LINER – 1″ THK |
| 60758 | LOWER END 1″ THK |
| 62024 | Belt, Rubber Mill |
| 62507 | LOWER END 1″ THK |
| 62507EXT | End Liner, Lower, Extended |
| 724473 | TUNE UP KIT DT – 13.5″ 12 BLADE 49DEG |
| 725457 | TUNE UP KIT BCP #15 37 DEG |
| 728355 | TUNE UP KIT DT – 13.5″ 8 BLADE 70DEG TruBlast (also c185366) |
| 735024 | TUNE UP KIT DT – 13.5″ 8 BLADE 49DEG TruBlast |
| 75137 | BUCKET 10x |
| 77379 | WHEEL HOUSING |
| 84431 | 17″ BLADE (12 / SET) |
| 87327 | Liner, End (17″ o/a, 16-3/8″ face) |
| 87402 | TOP LINER- 11 3/4” x 5 1/8” x 1”. |
| 89590 | 13.5″ DOUBLE TAPER BLADE, 12/SET |
| 89798 | 13½” BLADE (12/SET) |
| 96687 | TUNE UP KIT 13-1/2″ WHL 12 BLADE |
| 96688 | TUNE UP KIT 13-1/2″ WHL 12 BLADE |
| 96689 | TUNE UP KIT 13-1/2″ WHL 12 BLADE |
| C100303 | Lance Liner |
| C102CCA | Control Cage Adaptor Universal ( 102130 102128 102029) |
| C1052 | CHAIN LINER |
Disa Goff Blastec – Parts list
| P/N | DESCRIPTION |
|---|---|
| 0000268 | CAGE RETAINER /INNER 12 |
| 0000291 | HUB/12 7 STATION (uses 6001204 T/L ADAPT.) |
| 0000293 | SEAL, FELT 3/4″ X 3/4″ X 18″ LONG |
| 0102045 | HOUSING/BLAST WHEEL 12 |
| 104111 | BLADE/SET OF 8 |
| 104112 | BLADE/SET OF 4 |
| 144500-B | Tune up Kit 9/10″ Wheel (Also p/n200186) |
| 144500-C | Tune up kit 9/10″ wheel |
| 144502-D | TUNE UP KIT 12” Whl 7 pos |
| 144503-D | Tune up kit 13.5″ wheel 7 pos |
| 144504-D | Tune up kit 15″ wheel 7 pos |
| 5000109 | Top Liner 9″ wheel |
| 5000110 | Liner, End 9″ wheel |
| 5000111 | Liner – Side 9/10 WH |
| 5000122 | Liner – End/Long 9/10 |
| 5000129 | LINER, End EXTENSION |
| 5000136 | IMPELLER, 7 Blade |
| 5000137 | CENTER PLATE |
| 5000138 | CONTROL CAGE 40 deg |
| 5000145 | CONTROL CAGE 40 dege 9/10 wheel |
| 5000147 | CENTERING PLATE |
| 5000158 | IMPELLER 9/10 |
| 5000230 | CONTROL CAGE, 2″ Wide Window Goff Deg |
| 5000294 | Shear Ring |
| 5000302 | Feed SPOUT SEAL |
| 5000303 | FEED SPOUT, 90 deg 12″ wheel |
| 5000860 | Cast Nut 1/2-13 Flanged (220040) |
| 5001239 | 3 BB MILL BELT 5/16″ holes |
| 5001936 | LINER, TOP 12″ |
| 5001936-002R | Liner Top Right |
| 5001937 | END LINER |
| 5001938 | LINER, REAR SIDE |
| 5001939 | LINER, FRONT SIDE |
| 5002000 | Mill Belt 12BB GN 5/16″ holes |
| 5002001 | Mill Belt Support 12BB |
| 5002006 | Rubber Mill Belt, 3BB 1/4″ drain holes standard spacing, |
| 5002103 | IMPELLER, 8 Blade |
| 5002308 | LINER, END LONG |
| 5003265 | OUTER Liner 12BB BARREL SEGMENTS |
| 5004420 | BARREL SEGMENT, Outer 6BB |
| 5004421 | CENTER, HEAD BARREL LINER BB |
| 5004422 | Outer Liner Segment 3BB |
| 5100104-4R | Blade Blocks CW 9/10 |
| 5100106-4 | Blade 9/10 wheel – 4/set w/springs |
| 5100116 | BLOCK/CW SET 7 (116) |
| 5100117-7L | BLOCKS/BLADE 12″ WHEEL 7 BLADED CCW |
| 5100129 | Liner, Ext 12″ blast wheel Goff |
| 5100292 | SEAL, HUB 12″ / CAST 2 PC |
| 5100301 | ADAPTER/CAGE 12″ WHEEL |
| 5100651 | Spring, Blade, 12″ wheel, price per each |
| 5101261-4L | BLOCK/CCW SET 9/10 |
| 5101366-7 | BLADE 7/SET w/SPRINGS |
| 5101540-8 | BLADE 8/SET w/SPRINGS (7set= 5102064-7) |
| 5101541-8 | BLADE 8/SET w/SPRINGS |
| 5101542-8 | BLADE 8/SET w/SPRINGS |
| 5101543-8L | BLADE BLOCK SET, CW, set of 8 |
| 5101544-8L | BLADE BLOCK SET, CCW, set of 8 |
| 5102063-7 | BLADE 7/SET w/SPRINGS |
| 5102064-7 | BLADE 7/SET w/SPRINGS (8 set= 5101540-8) |
| 580-400-120 | IMPELLER |
| 580-400-150 | CONTROL CAGE |
| 580-400-502 | BLADE |
| 595-016-040i | Impeller |
| 595-016-042 | BLADE |
| 595-016-054i | Control Cage |
| 595-016-056 | BLADE |
| 595-016-062 | Blade set of 8 |
| 595-016-074 | BLADE set of 8 |
| 595-016-075 | BLADE set of 8 |
| 595-016-5621 | WHEEL |
| 595-016-853 | LINER, TOP CURVED |
| 595-016-855 | LINER, END |
| 595-017-113 | TOP LINER |
| 595-111-124-5 | CHAIN LINK RH G.F./Disa/Goff |
| 595-111-125-5 | CHAIN LINK LH G.F./Disa/Goff |
| 595-251-0671 | FUNNEL, EXIT |
| 6001204 | Bushing Adapter (use 61204) |
| 6000857 | Taper Lock Bushing |
| 6000956 | Taper Lock Bushing SAME AS 428843 |
| 6000962 | LOCK WASHER |
| 6100555 | Urethane belt 5/8 x 114″ Lg |
| 7003910 | 1/2- 13Ncx1 Socket Head Screw |
| 7003920 | 1/2-13Ncx2 Socket head screw |
| 7004114 | BOLT/IMPELLER SHCS 5/8-11 x 1-1/2 Lg |
| 7008900 | BOLT/PLOW 2″ USED ON GOFF BARREL HEAD |
| C0002428 | Bare Wheel 12″ 7/blade |
| C0044559 | Wheel, Bare 12″ 8/Blade |
| C0044560 | Hub 12 8 station |
| 4973815 | Base Plate – 75 HP BT2400 |
| BT39 | BW Housing Assy BT2400 |
| BT031A-1 | Lid, BW Housing BT2400 |
| 8080068 | 75hp Blast Wheel Motor BT2400 |
| BT163 | Roll pin, BW Housing Lid BT2400 |
| 3000196 | .5 x 2.125in Clevis BT2400 |
| 7003108 | 1/2 lock washer BT2400 |
| Hardware | 1/2-13 x 1 1/2″ long bolt BT2400 |
| 4980853 | Liner, Nut Clam & Retainers BT2400 |
| BT150 | Bolt, Top Liner Retainer BT2400 5/8″ x 1 1/4″ |
| BT151 | Bolt, End Liner Retainer BT2400 |
| BT161 | Bolt Wear-Less Liner Retention 1/2-13 x 1 3/4″ |
| BT182 | Jam Nut Liner Retainer BT2400 |
| BT22A | Gasket Lid BT2400 |
| BT205 | Spout 3-1/2″ 90 Deg BT2400 |
| BT204 | Spout 3-1/2″ 45 Deg BT2400 |
| BT55 | Spout Straight BT2400 |
| BT2-1.5 | Cage 1-1/2″ opening BT2400 |
| BT2-2.5 | Cage 2-1/2″ Opening BT2400 |
| 3000169 | Bushing T/L 1-5/8″ 15/20HP BT2400 |
| 3000170 | Bushing T/L 1-7/8″ 25/30HP BT2400 |
| 3000171 | Bushing T/L 2-1/8″ 40/50HP BT2400 |
| 3000172 | Bushing T/L 2-3/8″ 60/75HP BT2400 |
| 3000173 | Bushing T/L 2-7/8″ 100HP BT2400 |
| 6000136 | Abrasive Valve – Cylinder Assy |
| 7003914 | Bolt, Impeller Retainer |
| 7002707 | 3/8-16 Nut |
| 7003006 | 3/8 Flat Washer |
| 7003106 | 3/8 Lock Washer |
| 7003910 | SHCBolt – 5/16-18 x 1/2 |
| BT012 | Pin, Blade Lock CBT |
| BT013 | Seal, Spout |
| BT067 | Rear Seal Retainer |
| BT10 | Bushing, Blade Pin |
| BT11 | Cover, Blade Pin |
| BT154 | Bolt, Runnerhead Retainer FHCS CBT |
| BT15CP | Centering Plate – Universal Hub |
| BT15OR | O-Ring – Centering Plate |
| BT15TL | Runnerhead Hub – Universal |
| BT20 | Impeller CBT |
| BT24 | Runnerhead |
| BT6 | Spout Clamp CBT |
| BT7 | Control Cage Adapter |
| BT70C-1 | Seal, Hub Poly Felt (3pc) |
| BT8 | Blade set of 8 |
| BT91 | Dial (Control Cage Position Indicator) |
| 8080068 | Motor Blast Wheel BT2400 |
| BT8000125 | Motor 25HP |
| BT000130 | Motor 30HP |
| BT8000140 | Motor 40HP |
| BT8000150 | Motor 50HP |
| BT80001060 | Motor 60HP |
| BT8000069 | Motor 75HP |
| BT8000100 | Motor 100HP |
| 3060105 | Seal – Spout 9/10 Wheel |
| 4043525 | Base – Blast Wheel 9/10 |
| C0003703 | Retainer – Cage – Inner 9/10Wh |
| C0003710 | Clamp – Feed Spout 9/10 Wh |
| C0009383 | Wheel – Hub 9/10 |
| C0103572 | Lid – BW Housing 9/10 |
| C0103624 | Housing – Blast Wheel 9/10 |
| 5102624 | Cage – Adapter – Outer 9/10 |
| 5103576 | Seal – Rear Hub 9/10 |
| C6000468 | Bushing T/L 1615 x 1-1/8 Bore |
| C6101046 | Roll Pin 1/4 x 7/8 |
| C6101159 | Clevis – Yoke End (2 needed) |
| 7003910 | Bolt – Block |
| 7004712 | Screw 1/2 -13 x 1-1/4 Sq set |
| 7009523 | Stud Support 3/8 x 2.5″ |
| 5000108 | Spoud – Feed 9/10 |
| 3050107 | Spout – Feed – 90 deg 9/10 |
| C8101033 | Motor 3hp – Blast Wheel 9/10 |
| C8101040 | Motor 5hp – Blast Wheel 9/10 |
| 4040180-A | Rim, 8 place Rim w/1/4 x 7/8 roll pin |
| 3050010 | Medallion, Rim Loc |
| 7000021 | Torx Head Screw |
| 3050011 | Filler Rim Loc 8 |
| C6000531 | Roll Pin |
| 5100651-8 | Spring, Blade, 12″ wheel, Comes in packs of 8 |
| P6000024-8 | Blade 14″ set of 8 Rim Loc |
| P6000025-8 | Blade 15″ set of 8 Rim Loc |
| P6000028 | Centering Plate Rim Loc |
| 3060153 | O-Ring (Centering Plate) Rim Loc |
| P6010000 | Impeller – 8 Rim Loc |
| 6000962 | 5/8 H/C Lock Washer Rim Loc |
| 3051940 | Liner – Side – Rear |
| C00002046 | Liner B/H Lid |
| 3060151 | Seal – Felt |
| P6020002 | Seal Plate – Rear 5’8″ Lip |
| P6000027 | Seal Plate – Rear 1.25″ Lip |
| P6000029 | 54 Deg Control Cage Rim Loc |
| P6050014 | 40 Deg Control Cage Rim Loc |
| 3060152 | O-Ring Spout (Astech#60152) |
| C0102041 | Lid – Blast Housing |
| 4060789 | Seal – Rear – Inner |
| 1000006-B | Tune Up Kit – RimLoc 14-8 Whl 50 |
| 1000011-B | Tune Up Kit – RimLoc 14-8 Whl 40 |
| 1000006-C | Tune Up Kit – RimLoc 14-8 Whl 50 |
| 106040 | Abrasive Valve Assy 3″ |
| 1000017 | Tune Up Kit |
| BT-002-1.5 | Control Cage 1-1/2″ Opening (w/o ring) |
| BT-002-2.5 | Control Cage 2-1/2″ Opening (w/o ring) |
| BT-007 | Adaptor Box |
| BT-6 | Spout Lock |
| BT-010. | Blade lock pin bushing |
| BT-011 | Pin Cover |
| BT-012 | Blade Lock Pin |
| BT-013 | O-Ring |
| BT-020 | Impeller |
| BT-031A-1 | Housing cover assembly, cover hinge, gasket |
| BT-0503 | End Liner, 1 piece 24″ |
| BT-0503A | End Liner, 1 piece 26″ |
| BT-0503B | End Liner, 1 piece 22-7/16″ |
| BT-070C-1 | Hub Seal |
| BT-22A | Top Cover Seal |
| BT-24 | Runnerhead & (BT-154 Retainer bolt sold separately) |
| BT-45 | Side Liner, Upper Right |
| BT-47 | Side Liner, Lower Right |
| BT-48 | Side Liner, Lower Left |
| BT-50 | End Liner Lower – 2 piece 14 1/2″ |
| BT-50S | End Liner Lower – 2 piece 16 1/2″ |
| BT-51 | Side Liner, Upper Left |
| BT-53 | End Liner, Upper, 2 piece |
| BT-54 | Top Liner |
| BT-008 | Blade Set |
| BT-154 | Head screw Socket |
| BT-159 | cast nut 1/2″ (use 220040) |
| BT-161 | Bolt |
| BT-166 | Impeller bolt and lock washer |
| BT-183 | Nut |
| BT-188 | Lock Washer |
| CBT-15CP | Centering Plate – Universal Hub |
| CBT-15OR | O-Ring, Centering Plate |
| CBT-15TL | Runnderhead Hub – Universal (must purchase Centering plate and O-Ring) |
| BT-204 | Power Nozzel |
| CBT-205 | Feed Spout – Cast (3-1/2″ 90 degree) |
BLAST OEM PART CATEGORY NAVIGATON
Wheelabrator
Pangborn
BCP
Disa Goff Blastec
REQUEST A QUOTE TODAY!
Click the button below to fill out our request a quote interactive form. You can upload your drawing and files to be quoted. We will reach out to you as soon as we get your request.
